Fulcrum Acoustic CCX1226 Cardioide Coax 12+3" 120x60  57V/400W 8 Ohm

Fulcrum Acoustic CCX1226 Cardioide

Coax 12+3" 120x60 57V/400W 8 Ohm

Varenr: 135136
Alt. varenr: CCX1226
BeskrivelseEkstern Info
Beskrivelse

CCX1226

 Product Series: TQ Install

Overview

The CCX1226 is a coaxial, passive subcardioid loudspeaker that provides 9 dB of low frequency attenuation in the rear hemisphere while still providing the output capability of a normal 2-way system in a much more compact enclosure. Its coaxial transducer and 120° x 60° horn can be rotated in 45° increments, which allows its coverage to be tailored to an application’s requirements. The enclosure’s vertically trapezoidal shape allows it to be installed very close to ceilings or beneath large arrays with minimal effect on sight lines. Its unusually broad pattern is uniquely suited for use as the center channel in L-C-R systems, to solve difficult fill problems, and in many other applications. Fulcrum Acoustic’s TQ™ processing is an integral part of the CCX1226 design. Sound, innovative acoustical design combined with state of the art digital processing leads to exceptional clarity and precise transient response, even at very high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms. The CCX1226 is particularly effective in systems where targeted pattern control is desirable, and is an excellent solution for high fidelity, foreground distributed systems. Its unique shape and compact size complements many architectural styles, which facilitates acceptance by interior designers and architects. This makes it the perfect choice for houses of worship, theaters, restaurants, transportation facilities, theme parks, and more.

Performance Specifications

Operating Mode: Single-amplified w/ DSP

Operating Range: 71 Hz to 20 kHz

Nominal Beamwidth (rotatable): 120° x 60°

 

Transducers

HF/LF: Coaxial 3.0” titanium diaphragm compression driver;

12.0” woofer, 3.0” voice coil; single neodymium magnet

Power Handling @ Nominal Impedance: 57 V / 400 W @ 8 O

Nominal Sensitivity @ Input Voltage 4 (whole space): 103 dB @ 2.83 V

Nominal Maximum SPL (peak / continuous): 135 dB / 129 dB

Equalized Sensitivity @ Input Voltage: 97 dB @ 2.83 V

Equalized Maximum SPL 6 (peak / continuous): 129 dB / 123dB

Recommended Power Amplifier: 400 W to 800 W @ 8 Ohm

Physical Specifications

 

Connections

(2) Neutrik NL4 Speakon

Pin 1+/-: Full Range

Pin 2+/-: NC

 

Mounting / Suspension Points

(12) M10 x 1.5 eye bolt angle points, (2) M10 x 1.5 yoke points

 

Dimensions / Weight

See page 5 on spech sheet

 

Finish

Black painted enclosure w/ matte black grille, or

White painted enclosure w/ matte white grille

 

Options

YK-CX12 yoke bracket, Terminal strip input, Custom color finish,

Weather-resistant (WR) enclosure & hardware

 

Ekstern Info