Fulcrum Acoustic FA28 Black 3-way 8" + coax 8+1,7" 90x60 500W

Fulcrum Acoustic FA28 Black

3-way 8" + coax 8+1,7" 90x60 500W

Tuotenro: 135322
Valmistajan tuote.nro:FA28 BLack
KuvausTuki
Kuvaus

FA28 Dual 8" Coaxial Loudspeaker

Product Series: FA Portable

 

A portable, 3-way multi-purpose loudspeaker. Its rotatable horn provides broad coverage that is beneficial in both stage monitor and mains operation. Its multi-faceted enclosure includes a pole mount socket, 40° and 50° rear angles for stage monitor use, and M10 threaded accessory plates for use with optional suspension hardware such as the FA28 Yoke Bracket.

 

Overview

The FA28 is a portable, 3-way coaxial loudspeaker that is well suited for a variety of sound reinforcement applications. Its neodymium coaxial transducer and 90° x 60° horn provide broad coverage that is beneficial in both stage monitor and mains operation, and its dedicated neodymium low frequency transducer provides additional low frequency directivity and mid bass impact. Its multi-faceted, enclosure includes a pole mount socket, 40° and 50° rear angles for stage monitor use, and M10 threaded accessory plates for use with optional suspension hardware such as the FA28 Yoke Bracket. The compact enclosure is vertically-oriented, but if a horizontal orientation is desired, it can be easily obtained by exchanging the pole socket with one of the M10 accessory plates and rotating the coaxial transducer to provide appropriate coverage angles. When rotated, the FA28’s low profile also makes it very useful as a high output front fill system when placed on the edge of a stage apron. Fulcrum Acoustic’s TQ™ processing is an integral part of the FA28 design. Sound, innovative acoustical design combined with state of the art digital processing leads to exceptional clarity and precise transient response, even at high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms. Free air and stage monitor presets are available for all platforms. The FA28 provides big sound in very small package, and 31 Hz extension is possible when it is paired with the ultra-compact TS212 dual 12 inch subwoofer. This system’s combination of high performance, labor saving portability, and aesthetic appeal represents an ideal solution for corporate A/V, television/radio productions, theatrical productions, nightclub PA, portable DJ systems, and more.

 

Performance Specifications

Operating Mode

Single-amplified w/ DSP
Operating Range 2
48 Hz to 20 kHz
Nominal Beamwidth (rotatable)
90° x 60°

Transducers
LF: 8.0” ceramic magnet woofer, 2.0” voice coil
HF/LF: Coaxial 1.7” titanium diaphragm compression driver;
8.0” woofer, 2.0” voice coil; single neodymium magnet
Power Handling @ Nominal Impedance 3
63 V / 500 W @ 8 Ohm
Nominal Sensitivity @ Input Voltage 4 (whole space)
100 dB @ 2.83 V
Nominal Maximum SPL (peak / continuous)
133 dB / 127 dB
Equalized Sensitivity @ Input Voltage 5
95 dB @ 2.83 V
Equalized Maximum SPL 6 (peak / continuous)
128 dB / 122 dB
Recommended Power Amplifier
500 W to 1000 W @ 8 Ohm

Physical Specifications

Connections

(2) Neutrik NL4 Speakon
Pin 1+/-: Full Range
Pin 2+/-: NC
Mounting / Suspension Points
(1) 35 mm / 1.38 inch pole socket
(2) M10 nut plates
(3) M10 accessory plates*
*M10 thread is sealed. Use bolts with 15-20 mm shank length.

Dimensions / Weight

See page 5 product Sheet

Finish

Black painted enclosure w/ matte black grille

Tuki