Colour System: |
Laser Phosphor |
Display
Type: |
1 x 0.67" DarkChip™ DMD™ |
DMD Specification: |
1920 x 1200 pixels native display. |
| Fast transit pixels for smooth greyscale and
improved contrast. |
Aspect
Ratio: |
16x10 |
Fill
Factor |
87 % |
Key Features: |
Video & Graphics Processing
|
|
| HDMI 2.0 |
| DisplayPort 1.2 |
| Side by Side, Frame Packing, Frame Sequential,
TopBottom and Dual Pipe 3D Formats. |
| Syncronisation of active glasses or polarising
switcher. |
| DICOM simulation mode (For non-diagnostic or
training) |
| HDR support |
| 2D Smear reduction |
|
| Geometry Correction |
|
| Vertical & Horizontal Keystone correction |
| Four Corner adjustment |
| Selectable aspect ratios: 5:4 / 4:3 / 16:10 /16:9
/ 1.88 / 2.35 / TheaterScope / Source / Unscaled |
| Digital Zoom |
|
| HDBaseT Interface |
|
| Built in support for transmission of uncompressed
High Definition Video over standard CAT5e/6 LAN cable. |
| Allows the projector to be placed up to 100m from
the source with low cost cabling. |
| HDBaseT® Includes Ethernet 100BaseT and RS232/IR
control. |
|
| Colour Processing |
|
| Phosphor wheel: 2 x 7200rpm (120Hz) |
| Colour wheel: 4 Segment RGBY 2 x 7200rpm (120Hz) |
| 10-bit colour processing (30-bits per pixel)
1,073,741,824 colours |
| Powerful seven point colour correction for
accurate colour matching. |
| |
Source
Compatibility |
Graphics standards: Up to WUXGA 1920 x
1200 - 120Hz RB |
Inputs/Outputs |
Video
& Computer |
|
| Type |
Connector |
Qty |
|
| HDMI 2.0 |
HDMI |
2 |
|
| DisplayPort 1.2 |
DisplayPort |
2 |
|
| HDBaseT |
8P8C
"RJ45" |
1 |
|
| 3G-SDI in |
BNC |
1 |
|
| 3G-SDI out |
BNC |
1 |
|
| . |
| Communication & Control |
|
| Type |
Connector |
Qty |
|
| 3D Sync In |
BNC |
1 |
|
| 3D Sync Out |
BNC |
1 |
|
| 3D Sync IR |
BNC |
1 |
|
| LAN / Art-Net |
EtherCON
RJ45 |
1 |
|
| HDBaseT/Ethernet/RS232/IR |
RJ45 |
1 |
|
| Serial In RS-232C |
9-pin
D-Sub |
1 |
|
| Serial Out RS-232C |
9-pin
D-Sub |
1 |
|
| Wired Remote In |
3.5mm
Stereo Jack |
1 |
|
| Wired Remote Out |
3.5mm
Stereo Jack |
1 |
|
| 12V Trigger |
3.5mm
Stereo Jack |
1 |
|
| USB
Power out 5V/2A |
USB Type A |
1 |
|
3D Formats Supported |
Frame
Packing |
| Dual Pipe |
| Frame Sequential |
| Side By Side (half) |
| Top and Bottom |
HDTV Formats Supported |
SDTV (480i,
576i), EDTV (480p, 576p), HDTV (720p, 1080i, 1080p), NTSC (M, 3.58/4.43 MHz),
PAL (B,D,G,H,I,M,N), SECAM (B,D,G,K,K1,L) Display Support for 2K 2048 x 1080
up to 60Hz and 4K-UHD 3840 x 2160 up to 60Hz |
Computer Compatibility |
VGA, SVGA,
XGA, SXGA, SXGA+, UXGA, WUXGA@60hz, Mac |
Remote Control |
Infrared Remote Control Unit |
Automation Control |
LAN - Webpage control |
| TCP/UDP control |
| RS-232 |
| Alert Mail for Projector |
| LAN Control-Crestron® Connected |
| LAN Control-PJ Link Class 1 compatible |
| LAN Control-AMX® Device Discovery |
| Art-Net (DMX) control |
Colour
Temperature |
User selectable (3200K/ 5400K / 6500K /
7500K / 9300K / Native ) |
illumination
Type |
Laser Phosphor |
Typical
illumination Life |
20,000 hours |
Lens |
Lens |
Part
No. |
Optimised
Focus Range* |
Lens Shift (Frame) |
| 0.38 :1 fixed |
117-341 |
0.68m - 2.44m |
Depends on
image size, see Installation Guide. |
| 0.75 - 0.93 :1 zoom |
115-339 |
1.02m - 12.7m |
Vert: 0.5
(U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame |
| 0.76 :1 fixed |
112-499 |
0.81m - 5.08m |
none |
| 1.25 - 1.79 :1 zoom |
112-500 |
1.33m - 11.73m |
Vert: 0.5
(U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame |
| 1.73 - 2.27 :1 zoom |
112-501 |
1.83m - 14.9m |
Vert: 0.5
(U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame |
| 2.22 - 3.67 :1 zoom |
112-502 |
2.36m - 24.2m |
Vert: 0.5
(U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame |
| 3.58 - 5.38 :1 zoom |
112-503 |
3.8m - 35.35m |
Vert: 0.5
(U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame |
| 5.31 - 8.26 :1 zoom |
112-504 |
5.59m - 54.8m |
Vert: 0.5
(U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame |
|
| * Lens focal ranges above are the optimised
distances but are likely to focus further, please contact your RSM for more
details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/-
5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%, |
Lens Mount |
Motorised and programmable shift, zoom
and focus. |
| Intelligent Lens Memory with 10 user-definable
preset positions (except UST lens). |
Mechanical Mounting |
Front/Rear Table |
| Front/Rear Ceiling |
| Adjustable Front/Rear Feet |
| Ceiling Mount compatible chassis with 6 off M4*0.7
mounting holes available, Maximum screw length 16mm |
Orientation |
Table Top or Inverted: Yes |
| Pointing
Up: Yes |
| Pointing Down: Yes |
| Roll (Portrait): Yes |
Power
Requirements |
100-240VAC 50/60Hz single phase 6.8A |
Power
Consumption |
583W @ 240VAC (100% Normal mode) 606W @
100VAC (100% Normal mode) Standby: <0.5W (Network Off), <2W (Network
On) |
Thermal
Dissipation |
1988 BTU/Hour @ 240VAC (100% Normal mode)
2070 BTU/Hour @ 100VAC (100% Normal mode) |
Fan
Noise |
Normal mode: 40 dBA typical |
Operating/Storage Temperature: |
Operating: 0 to 40 °C (32 to 104 °F) |
| Force ECO over 35°C (95°°F) |
Operating
Humidity |
20%-90% non-condensing |
Weight |
27.5 kg / 60.6 lbs |
Dimensions |
L: 598mm x W: 500mm x H:218mm |
| L: 23.54 inch x W: 19.68 inch x H: 8.58 inch |
Safety
& EMC Regulations |
CB report, cTUVus, CE (European Economic
Area), UKCA (United Kingdom), CCC (China), CECP (China Energy Conservation
Program), CELP (China Environmental Labeling Program), China RoHS, FCC Class
A (USA), FDA, KC (Korea), BSMI (Taiwan), RCM (Australia), IEC 60825-1 Ed3
:2014 - Class 1 Laser Product, IEC EN 62471-5:2015 - Risk Group 2 & 3
(Lens dependent) |