CCX1265

 Product Series: TQ Install

Overview

The CCX1265 is a coaxial, passive subcardioid loudspeaker that provides 9 dB of low frequency attenuation in the rear hemisphere while still providing the output capability of a normal 2-way system in a much more compact enclosure. Its coaxial transducer and 60° x 45° horn can be rotated in 45° increments, which allows its coverage to be tailored to an application’s requirements. The enclosure’s 40° vertically trapezoidal shape allows it to be mounted very close to ceilings with minimal effect on sight lines. Fulcrum Acoustic’s TQ™ processing is an integral part of the CCX1265 design. Sound, innovative acoustical design combined with state of the art digital processing leads to exceptional clarity and precise transient response, even at very high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms. The CCX1265 is particularly effective in systems where targeted pattern control is desirable, and is an excellent solution for high fidelity, foreground distributed systems. Its unique shape and compact size complements many architectural styles, which facilitates acceptance by interior designers and architects. This makes it the perfect choice for houses of worship, theaters, restaurants, transportation facilities, theme parks, and more.

Performance Specifications

Operating Mode: Single-amplified w/ DSP

Operating Range: 71 Hz to 20 kHz

Nominal Beamwidth (rotatable): 60° x 45°

Transducers:

HF/LF: Coaxial 3.0” titanium diaphragm compression driver;

12.0” woofer, 3.0” voice coil; single neodymium magnet

Power Handling @ Nominal Impedance: 57 V / 400 W @ 8 O

Nominal Sensitivity @ Input Voltage: (whole space): 104 dB @ 2.83 V

Nominal Maximum SPL (peak / continuous): 136dB / 130dB

Equalized Sensitivity @ Input Voltage: 96 dB @ 2.83 V

Equalized Maximum SPL 6 (peak / continuous): 128 dB / 122 dB

Recommended Power Amplifier: 400 W to 800 W @ 8 Ohm

Physical Specifications

Connections

(2) Neutrik NL4 Speakon

Pin 1+/-: Full Range

Pin 2+/-: NC

Mounting / Suspension Points

(12) M10 x 1.5 eye bolt angle points, (2) M10 x 1.5 yoke points

Dimensions / Weight: See page 5 in spech sheet

Finish

Black painted enclosure w/ matte black grille, or

White painted enclosure w/ matte white grille

Options

YK-CX12 yoke bracket, Terminal strip input, Custom color finish,

Weather-resistant (WR) enclosure & hardware