Fulcrum Acoustic CCX896 Cardioide Coax 8+1,7" 90x60 63 V/250 W @ 16 Ohm

Fulcrum Acoustic CCX896 Cardioide

Coax 8+1,7" 90x60 63 V/250 W @ 16 Ohm

Tuotenro: 135130
Valmistajan tuote.nro:CCX896
KuvausLisävarusteetTuki
Kuvaus

CCX896

 Product Series: TQ Install

Overview

The CCX896 is a coaxial, passive subcardioid loudspeaker that provides 7 dB of low frequency attenuation in the rear hemisphere while still providing the output capability of a normal 2-way system in a much more compact enclosure. Its coaxial transducer and 90° x 60° horn can be rotated in 45° increments, which allows its coverage to be tailored to best suit an application’s requirements. The enclosure’s vertically trapezoidal shape allows it to be installed very close to ceilings or beneath large arrays with minimal effect on sight lines. Fulcrum Acoustic’s TQ™ processing is an integral part of the CCX896 design. Sound, innovative acoustical design combined with state of the art digital processing leads to exceptional clarity and precise transient response, even at very high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms. The CCX896 is particularly effective for fill systems where targeted pattern control is desirable. In addition, its 16 ohm nominal impedance makes it an excellent solution for high fidelity, foreground distributed systems where a high loudspeaker-to-amplifier ratio is desirable. Its unique shape and compact size complements many architectural styles, which facilitates acceptance by interior designers and architects. This makes it the perfect choice for houses of worship, theaters, restaurants, transportation facilities, theme parks, and more.


 

Performance Specifications

Operating Mode

Single-amplified w/ DSP

Operating Range: 81 Hz to 20 kHz

Nominal Beamwidth (rotatable): 90° x 60°

 

Transducers

HF/LF: Coaxial 1.7 inch titanium diaphragm compression driver;

8.0 inch woofer, 2.0 inch voice coil; single neodymium magnet

Power Handling @ Nominal Impedance: 63 V / 250 W @ 16 Ohm

Nominal Sensitivity @ Input Voltage 4 (whole space): 104 dB @ 4.00 V

Nominal Maximum SPL (peak / continuous): 134 dB / 128 dB

Equalized Sensitivity @ Input Voltage: 95 dB @ 4.00 V

Equalized Maximum SPL 6 (peak / continuous): 125 dB / 119 dB

Recommended Power Amplifier: 250 W to 500 W @ 16 Ohm

 

Physical Specifications

 

Connections

(2) Neutrik NL4 Speakon

Pin 1+/-: Full Range

Pin 2+/-: NC

 

Mounting / Suspension Points

(2) M6 x 1.0 yoke points, (2) M6 x 1.0 pull back points

 

Dimensions / Weight

See page 5 in spech sheet

 

Finish

Black painted enclosure w/ matte black grille, or

White painted enclosure w/ matte white grille

 

Options

YK-CX8 yoke bracket, Terminal strip input, Custom color finish,

Weather-resistant (WR) enclosure & hardware

 

Lisävarusteet
Tuki